. 430-3QR User Manual ™ Models Covered: RTX430-3QR. Quadruple Connectivity – RTX430-3QR is compatible with four different interfaces; USB3, USB2, eSATA, and FireWire 800. F ive Easy-to-Configure RAID Modes – RAID setup is near-instantaneous and is capable of RAID 0, 1, 5, and 10. It is also capable of setting up hot spares for a three-disk RAID 5. R ugged Durability – The sturdy metal case provides excellent heat dissipation and rugged endurance. A heavy-duty handle also allows for easy transport.

1.1 Check the Accessories with Your RTX Secure 1.1 Accessories The following list contains the items that are included with this device. Please contact CRU-DataPort if any items are missing or damaged: 1.2 Identifying Parts of the RTX Secure 1.3 Warnings and Notices Accessories Quantity 2. Introduction to RAID RTX430-3QR Enclosure 2.1 Summary of RAID Levels Power cord 2.2 Hot Spares (Host Standby) USB3 Cable 3. Installation Steps eSATA Cable 3.1 Hard Drive Installation 3.2 Connecting and Powering the RTX430-3QR FireWire 800 Cable 4.

The RAID level becomes available as a menu option when exactly these numbers of drives that have ever developed bad sectors during previous hard drives are installed inside of the RTX enclosure. This could lead to possible device failure or loss of data.If both drives in either the RAID 0 or RAID 1 set fail, then the entire RAID will fail. If only one drive in each of the RAID 0 and RAID 1 sets fail, then the RAID is preserved. The RTX430-3QR supports SATA hard drives of various specifications and different capacities.

However, we recommend 2.2 Hot Spares (Host Standby) using drives of the same brand and type for optimal performance. Hot spares are connected as part of your RAID and are switched into If drives of different capacities are used in a RAID, the capacity operation when a drive fails. RAID 5 will support hot spares when.

3.2 Connecting and Powering the RTX430-3QR Screen Description The RTX430-3QR has one USB3 port, one eSATA port, two FireWire Disk#, Indicates the status of the individual disk in the numbered hard drive 800 ports, and one configuration switch on the rear of the unit. Slot:.

Unused: A new drive was installed and is not used by the RAID a. Choose one of the connection types and connect the applicable. Failing: Indicates the drive is malfunctioning. Possible causes cable from your computer to the corresponding port on the RTX. 7 Buzzer and Temperature Configuration amber when the temperature is reached, regardless of whether the buzzer is enabled or not. The RTX430-3QR is compatible with CRU Configurator 3.5 or higher, which System Alarm Buzzer allows IT administrators to change This buzzer will sound on 3 occasions: internal settings to meet individual needs.

Configurator allows the user. When the enclosure reaches the temperature set using the Enclosure temperature warning slider below.

When the fan fails As a visual alert, the System Status LED on your RTX enclosure will glow red when any of these three situations occur, regardless of whether the buzzer is enabled or not. RAID Warning Buzzer This buzzer will sound when the RTX enclosure is in degraded RAID mode (a drive has failed and is in need of rebuild or the RAID is rebuilding). This buzzer is disabled by default. The RAID Status LED will glow amber if this occurs, regardless of whether the buzzer is enabled or not.

You may have to click on the Show Hidden Icons arrow on the task bar to find the correct icon. Windows will indicate when it is safe to disconnect the RTX enclosure. Disconnecting the enclosure without first ejecting it can result in data loss. 9 RAID Is Not A Backup Because your RTX430-3QR features redundant RAID modes which pro- tect against a hard drive mechanical failure, it is an excellent part of any backup strategy. However, a RAID is not, in itself, a backup strategy. Many things besides hard drive failure can damage or erase your data:. Corruption caused by unexpected disconnection during data access (e.g.

Apple Configurator 2 User Guide

A cable is unplugged during a data transfer, or the computer crashes or loses power while writing to the drives) e. Technical Support (See Section 10.8).

Q: I’ve attached my RTX430-3QR and can see the volume, but it shows up twice. Which one is real?

A: I f you are seeing your RTX volume mounted twice, chances are the unit is connected to your computer using both the eSATA and FireWire connections. When this is the case, the OS may attempt. 11 Technical Specifications RTX and TrayFree are trademarks of CRU Acquisitions Group, LLC. Other marks are the property of their respective owners. © 2008, 2012 CRU Acquisitions Group, LLC. Limited Product Warranty Product Name RTX430-3QR CRU-DataPort (CRU) warrants this product to be free of significant defects in material and workmanship for a period of two years from the original date of purchase.

Cru Configurator. User Manual For Mac Mac

CRU’s warranty is nontransferable and is limited to the original purchaser. RAID Levels Sup- RAID 0, 1, 5, 10 ported Limitation of Liability The warranties set forth in this agreement replace all other warranties.

Cru Configurator. User Manual For Mac Download

CRU expressly disclaims all other warranties, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose and non- Interface Types &. USB2: up to 480 Mbps infringement of third-party rights with respect to the documentation and hardware. No CRU dealer, agent, or employee is.